产品中心

Solid State Drive

AH600 Series SSD products are equipped with proprietary firmware, which can provide customized services and a complete series of quality assurance.

AH600 Series SSD

AH600 Series SSD

Product Overview

The AH600 M.2 2280 NVMe SSD is based on the AN55-Z01A controller with PCIe Gen3 x2 interface. AH600 is used 3D TLC NAND flash and performance is up to 1700MB/s. Meanwhile, the power consumption of the AH600 module is much lower than traditional hard drives.

This document describes the specifications and capabilities of Anjieli SSD M.2 2280 128GB up to 1TB. The PCIe Gen 3.0x2 Lane M.2 SSD is a non-volatile, high-performance device, low-latency and is intended for cloud, hyperscale, enterprise data centers and computing environments that require high levels of application acceleration. The SSD also can be configured as a boot.


Product Block Diagram

SD表格.jpg

                                                      AH600 Functional Block Diagram

Specifications and performance

              Category

                       Feature

Product Configuration

• Form Factor:M.2 2280

• Capacity:128G/256G/512G/1TB

• NAND Flash:3D TLC

• Controller:AN55-Z01A

• Interface:PCIe Gen3 x2


Power Specifications

• Supply Voltage / Tolerance: 3.3V ± 5%

• Active Read: Up to 2.3W

• Active Write: Up to 2.4W

• Idle: 0.429W


Environmental Specifications

• Temperature: Operating: 0° ~ 70°C  Non-operating: -40 °C~ 85°C

• Humidity (non-condensing) Non-operating:5% ~ 95%

• Linear Shock (0.5ms duration with 1/2 Sine wave) Non-operating:1,500 G peak

• Vibration Non-operating (20 ~ 2,000 Hz, Sinusoidal):20 Gpeak


Product Features

• High Efficient Wear Leveling

• Bad Block Management

• TRIM

• Compliant with NVMe Express specification Rev. 1.3

• Support Admin & NVM Command Set

• Power Saving Modes:Supporting APST/ Supporting L1.2 Mode


Product Compliance

• FCC /CE/RoHS/WEEE


Performance Specifications

• Sequential Read:Up to 1700 MB/s

• Sequential Write:Up to 1400 MB/s

• 4K Random Read:Up to 250K IOPS

• 4K Random Write:Up to 200K IOPS


Physical Dimensions 

• Length:80.00 ± 0.15 mm

• Width:22.00 ± 0.15 mm

• Height (Single Side):Max 2.35 mm

• WeightMax 9.0g


Reliability Specifications

• MTBF:2,000,000 hours

• UBER:< 1 sector per 1015 bits read


Product pictures

SSSD.png